标准光？？？？ ？
1x9-155M-20km transceiver
Specifications
- 产品型号: FT19-1303-XXX(XXXX)
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: 1x9-155M-20km transceiver
- 传输距离: 20KM
- 发射波长: 1x9-155M-20km transceiver
- 吸收波长: 1x9-155M-20km transceiver
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 不带DDM
- 吸收迅速度: 1x9-155M-20km transceiver
- 吸收迅速度: 1x9-155M-20km transceiver
Description
1x9-155M-20km transceiver
1.Feature
- 1×9 package with FC connector
- 1310nm FP Laser and PIN photodetector
- 20Km transmission with SMF
- +5.0V single power supply
- PECL compatible data input/output interface
- Low EMI and excellent ESD protection
- laser safety standard IEC-60825 compliant
- Compatible with RoHS
2.Application
- Ethernet
- Telecom
3.Description
The1×9 transceiver supports 155Mbps and 20Kmtransmission distance with SMF.
The transceiver consists of two sections: Thetransmitter section incorporates a FP laser. thereceiver section consists of a PIN photodiodeintegrated with a trans-impedance preamplifier (TIA).
4.Performance specifications
4.1Absolute Maximum Ratings
|
Parameter |
Symbol |
Minimum |
Maximum |
Units |
|
Storage Temperature |
Tst |
-40 |
+85 |
°C |
|
Operating Temperature |
Top |
0 |
+70 |
°C |
|
Supply Voltage |
Vcc |
0 |
+5 |
V |
|
Input voltage |
Vin |
GND |
Vcc |
|
|
Lead Soldering Temperature & Time |
240/10 |
°C/s |
||
4.2Operation Environment
|
Parameter |
Symbol |
Minimum |
Maximum |
Units |
|
Supply Voltage |
Vcc |
4.5 |
5.5 |
V |
|
Ambient operating Temperature |
Top |
0 |
+70 |
°C |
|
Operating Relative Humidity |
- |
5 |
95 |
% |
4.3Transmitter Section
(Ambient Operating Temperature 0°C to +70°C, Vcc =5.0 V)
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Units |
|
Data rate |
- |
- |
155 |
- |
Mb/s |
|
Center Wavelength |
lo |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width |
Dl |
- |
- |
4 |
nm |
|
Average Optical Output Power |
Po |
-15 |
- |
-3 |
dBm |
|
Extinction Ratio |
Er |
12 |
- |
18 |
dB |
|
Rise/Fall Time(20%~80%) |
Tr/Tf |
0.26 |
ns |
||
|
Total jitter |
Tj |
0.43 |
UI |
||
|
Optical Eye Diagram |
IEEE 802.3u and ANSI Fibre Channel Compatible |
||||
|
Input differential impendence |
Zdiff |
100 |
Ohm |
||
4.4Receiver Section
(Ambient Operating Temperature 0°C to +70°C, Vcc =5.0 V)
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
unit |
|
Data rate |
155 |
Mb/s |
|||
|
Wavelength |
l |
1260 |
1620 |
nm |
|
|
Receiver Sensitivity |
Rsen |
- |
-34 |
dBm |
|
|
Receiver Overload |
Rov |
-3 |
|||
|
Output differential impendence |
Zdiff |
100 |
Ohm |
||
|
LOSS Thresholds |
LOSSD |
- |
- |
-34 |
dBm |
|
LOSSA |
-45 |
5.Pin Description
|
Pins |
Name |
Discription |
NOTE |
|
1 |
VeeR |
Receiver Ground |
|
|
2 |
RD+ |
IReceived Data Output (PECL) |
|
|
3 |
RD- |
Inv.ReceivedData Output (PECL) |
|
|
4 |
SD |
Signal Detected (PECL) |
|
|
5 |
VccR |
Receiver Power |
|
|
6 |
VccT |
Transmitter Power |
|
|
7 |
TD- |
Inv. Transmit Data Input (PECL) |
|
|
8 |
TD+ |
Transmit Data Input (PECL) |
|
|
9 |
VeeT |
Transmitter Ground |
Regulatory Compliance
F-tone Networks Optic transceiver is designed to be Class I Laser safety compliant and is certified per the following standards
|
Feature |
Agency |
Standard |
|
Laser Safety |
FDA |
CDRH 21 CFR 1040 annd Laser Notice No. 50 |
|
Product Safety |
BST |
EN 60825-1：2007 EN 60825-2：2004 EN 60950-1：2006 |
|
Environmental protection |
SGS |
RoHS Directive 2002/95/EC |
|
EMC |
CCIC |
EN 55022：2006+A1：2007 EN 55024：1998+A1：2001+A2：2003 |
Ordering information
|
Part Number |
Product Description |
|
FT19-1303H-20 |
1x9-sm1310-5V-PECL-SD:PECL-20km-SC |
|
FT19-1303H-20F |
1x9-sm1310-5V-PECL-SD:PECL-20km-FC |
|
FT19-1303H-20T |
1x9-sm1310-5V-PECL-SD:PECL-20km-ST |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone Networks before they become applicable to any particular order orcontract. In accordance with the F-tone Networks policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
1x9 0~10Mbps光？？？？ ？
F-tone’sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.
The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232、RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps，，These modules are fully compliant with the Multi-sourced 1×9 protocol.
Commerce level transceiver module which operating case temperature range at 0℃ to 70℃ and industry level which operating case temperature at -40℃ to +85℃ for available.
1x9 84Mbps MM Receiver Module
DC0~10M 1x9多模单收光？？？？ ？椋1x 9 0~10Mbps MM Receiver Module.F-tone’sFLRX-M1300-02X series of receiver modules are the perfect solution for Low-speed communication networks.The receiver modules support data rates up to 10Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The receiver modules supplies the 5 Voltage and provides the system designer with products to implement a range of low-speed data and fiber MODEM designs at the 0 to 10Mbps rate for fiber communications.
2~100Mbps 1x9单模光？？？？ ？
2~100Mbps 1x9单模光？？？？ ？:2~100Mbps 1 x 9 TTL Transceiver Module,F-tone’sFLTR-1x02-xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 100 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 84 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
2~52Mbps 1x9 TTL MM Transceiver
2~52Mbps 1x9 TTL MM Transceiver，，F-tone’sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber
1×9 0~10Mbps SM TTL Transceiver Module
1×9 0~10Mbps SM TTL Transceiver Module：F-tone’sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232、RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps，，These modules are fully compliant with the Multi-sourced 1×9 protocol.Commerce level transceiver module which operating case temperature range at 0℃ to 70℃ and industry level which operating case temperature at -40℃ to +85℃ for available.
1x9 84Mbps MM Transmitter Module
1x9 84Mbps MM Transmitter Module:F-tone’sFLTX-XX02-XX series of receiver modules are the perfect solution for Low-speed communication networks.The transmitter modules support data rates up to 84Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 3.3/5 Voltage and provides the system designer with products to implement a range of low-speed data at the 2 Mbps to 84Mbps rate for fiber communications.